man using a pool lift chair after lift chair mechanism installation

How A Pool Lift Chair Mechanism Installation Works

If you own or manage a business pool or spa, such as a swim club, hotel, or resort, the Americans with Disabilities Act (ADA) mandates the installation of a pool lift to help persons with disabilities. Let’s learn more about lift chair mechanism installation. 

You may start installing the pool lift once you’ve chosen your installation site. Each pool lift has its own set of criteria. So, make sure you know how each type of pool lift works before purchasing one. 

pool lift chair ready for use after lift chair mechanism installation

Retrofitting or Installing a New Pool Lift 

The installation requirements will vary depending on the kind of pool lift you choose. A single post slips into an anchor socket on certain lifts. Other lifts feature a ‘Jig’ plate with three or four bolts protruding from the concrete. 

Using a hole saw and epoxy, many pool lift types may be retrofitted. Drill numerous big holes in the pool deck, then fill the gaps with 2-part epoxy sealant to bind the mounting plate to the deck. 

This hole saw installation is complex because the mounting plate or anchor socket must be glued under local laws. 

Pouring a Lift Pad for a Pool 

A jig is required for some pool lifts, which must be built in extra-thick concrete (6-8 inches thick). Because most pool decks are just 4 inches wide, you’ll need to mark out the required area and cut it off using a concrete saw. Remove the rubble by breaking it up with a sledgehammer or jackhammer. 

Remove the gravel and dig 4-8 inches down (be careful of pipes and conduit). Install four rebar rods two inches from the bottom of your slab and four more two inches from the top, going in opposite directions. If feasible, attach the rebar to the existing deck and your mounting plate to the grid. 

Place your bonded mounting jig or post anchor into the cement bed at the proper time and depth. Pour concrete until it reaches the desired thickness. While curing, keep the jig level. Finish the surface by feathering up to the jig or post’s edge. 

Getting Your Pool Lift Bonded 

Most places will require that the pool lift be connected to the pool’s bonding grid, which is a bare copper wire that goes around the pool and connects the pool shell, lights, ladders, and rails. 

In most situations, the mounting jig or post anchor will come with a bonding lug that must be linked to an existing bonding loop, or the mounting plate may be bonded to the pool deck rebar grid. 

Connecting the bonding wire to a pool lift post or jig with a hole saw may need some imagination and involve running under the deck to the edge. In contrast, it is quicker to make the bonding connection if you remove the old pad and replace it with a new pad. 

If a proper connection is required, an electrician knowledgeable with local bonding standards for swimming pools should be contracted or employed.

lift chair mechanism installation successfully done

Want to Know How a Pool Lift Chair Mechanism Installation Works? 

Here are some useful tips to keep in mind before you buy a pool lift: 

  1. Make sure you have a suitable site in mind. 
  1. Before you buy a pool lift, make sure you read the installation manual thoroughly. 
  1. In compliance with local and national norms, plan to bond the elevator. 

As an installation guide, these are a few essential takeaways for lift chair mechanism installation. Finally, it’s a good idea to verify with your local county official or inspector before installation to ensure that your site, installation, and bonding are all approved. 

If you need someone to do all the heavy lifting, call Pool Lift Specialists. We can help you install any type of pool lift for your swimming pools. 

How Much Does a Pool Lift Installation Cost in Orlando?

Many establishments are now finding ways to cater to people with disabilities while still allowing them to enjoy using the pool. If you’re interested in learning more about the pool lift installation in Orlando, we’ve got you covered. 

The ADA requires establishments to have a pool lift installed if intended for public use. There are many kinds of facilities that use pool lifts–public pools, wading pools, and spas, for example. 

Not all are required to comply with pool lift installations. However, it is quite convenient to have whenever elderly adults, pregnant women, or those with disabilities want to use the pool for fun without being left out. If you do decide to install one, you have a lot to consider. 

pool that needs pool lift installation orlando

Pool Considerations 

Those who run existing public and “to be constructed” pools have many things to consider. Government departments may urge the necessity for a pool lift installation for practicality and convenience for those that need it.  

Below are a few things that one should consider before installing a pool lift: 

Entrance and Exits of a Pool for the Elderly, Pregnant, and Persons with Disabilities 

Entrances and exits for pools should be established when you have a plan for initial installation. It is one of the things you should consider for the convenience of the user. Knowing the entrance and exit for those that need the pool lift, there will be less confusion. 

Having a designated area for people with disabilities will help in making sure that the users don’t get bothered because the area is for them to use. This will also avoid any accidents when using a pool lift. 

The Pool Area 

A pool lift needs enough space to not hinder any passersby. The pool area should also have designated spaces that are easier to access for those who need the pool lift. Areas should also be big enough for a pool lift. 

Pool lifts can be used in small areas, but the size of the pool should still be able to accommodate a pool lift. The size of the pool is necessary because you have to accommodate many people and those that use the pool lifts. 

The depth of the pool lift should also be considered when installing. It is necessary that the depth is considered because the depth of the pool may not be suitable for those that are with disabilities, and it keeps them away from danger.  

Pool Lift and Installation Costs 

Expenses and budget are necessary when considering the pool lifts and installations. A rough estimate of pool lift cost would depend on what model you decide to use.  

A pool lift price can range from $2000 to $14,000, depending on the model and the type of pool lift.  

Knowing the costs of pool lifts and pool lift installation is necessary to research that one should do. The costs will determine how many you can buy and for what facility you will equip, such as wading pools and spas. 

Pool lifts and installation can be costly, and there are many things to consider. There are penalties that would reach as high as $87,000 when not complying with the requirements and urges of installing a pool lift. 

pool that needs pool lift installation orlando

Need a Pool Lift Installation in Orlando? 

Installing a pool lift can be expensive but not as costly as paying for the fines for not complying with the guidelines set by the ADA. If you need a pool lift installation in Orlando, call Pool Lift Specialists.  

We have trained professionals who can do the heavy lifting for you. Call us today